In-Sight 8000 Vision Systems Features

Thương hiệu: COGNEX
Tình trạng: Còn hàng
Liên hệ


In-Sight 8000 Vision Systems Features

In-Sight 8000 Vision Systems Features

This family of ultra-compact, standalone vision systems deliver industry-leading vision tool performance, in the form factor of a traditional GigE Vision camera. Measuring just 35mm x 32mm x 76mm, all In-Sight 8000 series models feature power over Ethernet (POE), and provide the best standalone vision system option for integrating into small spaces.

As the world’s smallest, stand-alone vision system, the In-Sight 8000 series offers a range of monochrome and color vision systems in resolutions from 0.3MP up to 5MP. Supporting Gigabit Ethernet for high-speed communications, these vision systems offer very fast acquisition and two performance levels to meet a diverse array of machine vision demands.

In-Sight 8405 color and grayscale


insight 800 series small vision system held in hand for perspective

Smallest vision systems

In-Sight 8000 compresses an entire self-contained vision system into an amazingly small package about the size of a traditional image-capture-only camera. All In-Sight 8000 models can be mounted at angles of up to 45-degrees using the In-Sight non-linear calibration tool. These vision systems are ideal for integrating into tight spaces on robots and hard-to-reach machinery anywhere on the production line.

The In-Sight 8000 models deliver high-performance vision tools, faster communication speeds, and high resolution in a small package that is ideal for integrating into small spaces where machine space is a premium.


See the In-Sight 8000 in 360 degrees

Get a closer look at the advanced features the In-Sight 8000 has to offer in a fully interactive guided 3D tour.

See it live


Animation of spinning In-Sight 8000 with 360 degrees icon

Easy to deploy and maintain

In-Sight 8000 series vision systems are conveniently setup with the In-Sight Explorer software. In-Sight Explorer combines the guided step by step setup of EasyBuilder with the additional power and flexibility of the spreadsheet for greater control and customizing of application data. TestRun system validation, Cognex Connect suite of communications protocols and the Cognex Explorer control center gives you the tools you need to keep your line operating on schedule and at full throughput.

In-Sight Explorer Software



  8100 8101 8200 8400 8401 8402 8405 8500P 8501P 8502P 8505P
Performance Factor 1X 1.7X 3.9X 4.6X
Image Type Monochome and Color Monochrome Monochrome and Color
Job/Program Memory 512 MB 14.8 GB
Image Processing Memory 512 MB
Sensor Type CMOS, global shutter CMOS, rolling shutter CMOS, global shutter
Resolution 640 x 480 1280 x 1024 640 x 480 640 x 480 1280 x 1024 1600 x 1200 2592 x 1944 640 x 480
880 x 600
1280 x 1024 1920 x 1200 2448 x 2048
HDR+ Support1 No Yes
Acquisition Rate (fps) Monochrome 217 76 217 217 76 53 13 133
66 55 32
Color 135 45 135 135 45 33 n/a 35 17
Lens Type C-Mount
Indicator LEDs Network status, 2 configurable LEDs
Built-in I/O 1 dedicated trigger input, 2 high speed outputs (including strobe). Additional I/O available via CIO-MICRO2 external I/O module.
Power Class 2 Power over Ethernet (PoE) Class 3 Power over Ethernet (PoE)
Industrial Connectors M12: Power/Ethernet, M8: I/O RJ45: Power/Ethernet, M8: I/O M12: Power/Ethernet, M8: I/O
Industrial Protocols OPC UA, Ethernet/IP with AOP, PROFINET Class B, iQSS, Modbus TCP, SLMP/SLMP Scanner
Size 31 mm x 31.2 mm x 75.1 mm 31 mm x 31.2 mm x 71.6 mm 35 mm x 32 mm x 75.55 mm
Weight 132.2 g 78 g 192 g
Network Speed 10/1000/1000 Mbps (Gigabit)
Rockwell Add-on Profile Yes

1 HDR+ supported on monochrome models only.

2 The In-Sight 8505P/8500P/8501P/8502P vision systems must be connected to a Class 0, 3 or 4 PoE power source, rated for at least 12.95 Watts. The CIO-MICRO I/O module is a Class 2 PoE device and therefore cannot be used to supply power to the In-Sight In-Sight 8505P/8500P/8501P/8502P vision system via the I/O module’s PoE port.


In-Sight Explorer Software

All In-Sight vision systems use In-Sight Explorer EasyBuilder to set up and monitor machine vision inspections. The intuitive interface guides operators through a step-by-step setup process allowing both novice and experienced users to configure vision applications quickly and easily. 

The majority of applications can be solved using the point-and-click EasyBuilder interface, however should your application requirements change, the In-Sight spreadsheet provides you with ultimate control through direct access to the vision tools and communication options. Access to the spreadsheet not only provides programming flexibility to make essential adjustments, it also offers assurance that you will be able to solve any of your vision applications.

System validation

TestRun validation enables you to refine, test and verify inspection systems automatically.

Built-in communications

The Cognex Connect suite offers the widest range of built-in communication protocols that interface directly interface to any PLC, robot or HMI on your factory network.

In-Sight Explorer EasyBuilder interface


    In-Sight 7000 Software


    In-Sight Vision Tools

    In-Sight vision processing tools consist of functions that extract and process image features for further data analysis and decision making. The In-Sight vision toolset consists of:

    Blob Tools

    Blob tool count finds defect

    Blob tools are used to detect features have similar shades of grey scale. Blob is very useful for quantifying defect sizes or for locating features that do not have a repeatable shape. Blob can be used for monochrome and color images to quantify the amount of a particular color present.

    Edge & InspectEdge Tools

    Edge tools finds missing piece

    Edge tools are used to detect dark and light transitions on a part. Edge tool results can be used to measure distances and can also be used to inspect by counting the number of edges found. Edges can also be used to detect and measure circles and arcs. The InspectEdge tool tracks an edge of a part to inspect for defects.

    Flaw Detection Tools

    Flaw detection tool finding misprinted 0

    The Flaw Detection tools, including Flex Flaw and Surface Flaw, are used to inspect contours and the surface area of parts. These advanced technologies are able to adapt to variations in lighting and in part appearance.

    Geometry Tools

    Geometry tools on metal manufactured part

    Geometry tools are used to measure critical dimensions of a part with point-and-click simplicity. Angles, arcs, diameters and point-to-line distances use real world calibration to provide accurate and repeatable results.

    Histogram Tools

    Histogram tools on makeup pallet

    Histograms are used to inspect or monitor features of parts based on brightness.

    ID Tools

    ID tool reads vertical 1d barcode

    In-Sight features PowerGrid and Hotbars, the Industry leading algorithms for Barcode reading, that help achieve the highest read rates for 1D and 2D Barcodes, including challenging Direct Part Mark (DPM) codes.

    Image Filtering Tools

    Image tools inspecting spice cap

    Advanced image filtering is used to highlight features or remove features of parts before doing additional processing with other vision tools. For color cameras, true 24-bit color filters are available.

    Optical Character Recognition Tools

    OCR tools

    The OCV/OCR tool segments, extracts and trains fonts for optical character recognition (OCR) and optical character verification (OCV) of characters in an image. The font trainable tool accurately reads low-contrast or unevenly-spaced characters on confusing backgrounds.

    Pattern Matching Tools

    Pattern matching tools on complicated metal parts on busy background

    Locating a part accurately is the first step in most vision applications. Cognex's industry leading pattern matching technologies, such as PatMax RedLine, provide unmatched accuracy and robustness, even with rotation, scale and lighting variations.

    Color Pattern Matching Tool


    Color PatMax RedLine locates parts based on shape and color allowing you to not only locate the model but also find the specific color of the model trained. This tool runs on the color image to create a more robust pattern finding model.

    Color Tools

    Color tools identifying orange liquid

    Color tools are used to identify and inspect objects based on color data and also measure by evaluating the amount of color pixels present. Advanced color vision technology maintains accuracy even with lighting variations that can cause problems for traditional color vision systems.


    Flexible hardware allows users to customize the In-Sight 3800 for any application, offering a solution that grows with your business. Choose from a variety of accessories to easily adapt to new parts and changes to the line, while keeping up with manufacturing demands, such as increased automation, faster line speeds, and higher quality standards.

    Mobile, platform-independent visualization

    In-Sight vision systems offers mobile, platform independent visualization for accessing HMIs (human machine interfaces) from anywhere on the network. A simple point-and-click interface allows customers to build highly interactive, web-based HMIs remotely accessible via a web browser over the network.

    In-Sight WebHMI on phone computer and tablet


    Inspect for assembly errors, surface defects, damaged parts and missing features. Identify the orientation, shape and position of objects and features.
    Gauge parts to check critical dimensions and/or measure components for sorting and classification processes.
    Guide automation equipment and robotic devices. Align parts for high accuracy assembly operations.
    Read and verify alphanumeric characters marked directly on parts and printed on labels.
    Barcode Reading
    Read 1-D barcodes and 2-D matrix codes as part of an overall inspection.

    Download Datasheet

    Liên hệ qua Zalo
    Liên hệ qua Facebook

    Số lượng:

    Tổng tiền:

    Nhận nhiều ưu đãi hơn